Best Truck Bed Slide Out Trays
Reaching gear buried deep in your truck bed shouldn't require crawling in headfirst or climbing over the tailgate. Whether you're a contractor pulling tools at every jobsite or a weekend camper loading coolers and gear, a slide-out tray turns your bed into an organized, accessible workspace.
This guide compares 7 truck bed slide out trays across weight capacity, materials, fitment, and value. We break down which trays suit heavy-duty work, which ones fit compact trucks, and where to save money without sacrificing quality.
Top 7 Best Best Truck Bed Slide Out Trays
Finding the right best truck bed slide out trays isn't always straightforward. To simplify the process, we compared leading products and shortlisted the ones that truly stand out.
1. ELEVATE OUTDOOR Slide-Out Truck Bed Tray
The clear top pick for contractors and heavy haulers who need serious weight capacity and full-width bed coverage.
Check Price On AmazonThe ELEVATE OUTDOOR Slide-Out Tray is the only metal-framed option in this roundup, and it shows. The carbon steel base glides on built-in rails while the embossed aluminum tray surface provides a grippy, scratch-resistant platform for tools and gear.
- Weight capacity: rated for a full 980 lbs — more than enough for stacked toolboxes, generators, or compressors
- Three-position handle: locks the tray fully extended, halfway out, or fully stowed — no other tray here offers mid-position locking
- Edge curbs: 1.125-inch raised lips on all four sides keep fasteners, drill bits, and small parts from rolling off
- Tray dimensions: 51.75" W × 57.25" L with a low 4.25" installed height
The dual-purpose design lets you run it as a single pull-out platform or as the bottom tier of a two-level storage system — ideal if you already have a truck bed drawer setup and want to add sliding access underneath. If you haul 300+ lbs regularly, this is the only tray in this roundup built to handle it without flexing.
- 980 lb. weight capacity handles toolboxes and heavy equipment
- Carbon steel base with embossed aluminum tray surface resists wear
- Three-position handle locks tray fully open, midway, or fully stowed
- 1.125-inch raised curbs on all sides keep small parts from sliding off
- 51.75-inch width covers nearly the full bed floor
- Heavier than HDPE alternatives due to metal construction
- Premium price point compared to plastic tray options
2. KOKSHELY Heavy-Duty Dual-Wall Sliding Truck Bed Cargo Tray
The smoothest-sliding tray here thanks to 12 bearing wheels, and the included accessory bundle adds genuine value.
Check Price On AmazonThe KOKSHELY stands out for one reason above all else: 12 heavy-duty bearing wheels. While most trays in this category rely on friction-based sliding, the KOKSHELY rolls on dedicated bearings that make pulling a loaded tray feel almost effortless.
- Construction: hollow blow-molded dual-wall HDPE — lighter than solid plastic but structurally rigid
- Surface: redesigned anti-slip textured pattern prevents cargo from shifting during transit
- Drainage: built-in channels route rainwater off the tray, keeping gear dry even in open beds
- Dimensions: 62" L × 46.1" W × 5" H — one of the widest and longest trays available
The included accessory kit is a genuine bonus. You get a storage net, 2 elastic straps, and 8 carabiners — enough to secure coolers, camping gear, or grocery runs without buying separate cargo nets. The multi-hole side mount panels accept aftermarket hooks and brackets, too.
The 5-inch height is the main trade-off. If you run a low-profile tonneau cover, measure your clearance before buying. Check our bed cover buying guide for compatibility tips.
- 12 heavy-duty bearing wheels for effortless sliding even when fully loaded
- Anti-slip textured surface with built-in drainage channels
- Full accessory kit included: storage net, elastic straps, 8 carabiners, and hooks
- Extra-large 62" × 46.1" footprint covers most of the bed floor
- Blow-molded dual-wall HDPE for strength without excessive weight
- 5-inch height profile is taller than most competitors — may not fit under low-profile bed covers
- No formal weight capacity rating listed by manufacturer
3. Rough Country Slide-Out Truck Bed Cargo Tray
A dependable, brand-backed tray for long bed owners who want half-bed sliding access with a solid warranty behind it.
Check Price On AmazonRough Country is a name most truck owners already trust for suspension lifts and off-road gear. Their slide-out tray brings that same build-it-tough philosophy to bed organization. The tray is made from high-density polyethylene (HDPE) with UV inhibitors baked in, so it won't crack or fade after years of sun exposure.
- Dimensions: 62.29" L × 23.6" W × 4" H — designed specifically for 5'7" and longer beds
- Tie-downs: adjustable straps plus molded anchor points keep gear locked in place
- Profile: at just 4 inches tall, it slides under any tonneau cover or bed cap
- Warranty: 3-year coverage from Rough Country — among the best in this category
The main limitation is width. At 23.6 inches, this tray covers roughly half the bed floor. That's fine if you want one side for organized, slideable storage and the other side open for bulky items. But if you need full-width access, look at the ELEVATE OUTDOOR or KOKSHELY instead.
For tips on maximizing the rest of your bed space alongside a half-width tray, our guide on how to organize your truck bed covers several effective layouts.
- Backed by Rough Country's 3-year manufacturer warranty
- High-density polyethylene with UV protection resists sun damage
- Adjustable tie-down straps and built-in anchor points for secure cargo
- Low 4-inch profile fits under virtually any bed cover
- 62.29-inch length accommodates ladders, golf bags, and long tools
- 23.6-inch width covers only one side of the bed — not full-width
- Requires 5'7" or longer bed — won't fit short bed trucks
4. Sts.Ev01 STSEV01 Slide-Out Truck Bed Organizer Tray
The foldable design makes this ideal if you don't need a permanent tray — set it up for jobs, fold it away for weekend hauling.
Check Price On AmazonThe Sts.Ev01 brings something no other tray in this roundup offers: a foldable design. When you don't need the sliding tray, it folds down for compact storage in your garage, shop, or even behind the back seat.
- Dimensions: 61.4" L × 47.2" W — wide enough to cover most of the bed floor
- Material: high-strength ABS engineering plastic with UV protection
- Compatibility: fits Ford F150/F250/F350, RAM 1500/2500/3500, Toyota Tundra, GMC Sierra with 5'5"+ beds
- Tie-downs: adjustable straps and built-in anchor points for cargo security
The ABS plastic construction is the one concern. While it's UV-protected and reasonably tough, ABS can become brittle in extreme cold — something to consider if you work in northern climates. HDPE trays like the Rough Country or KOKSHELY handle temperature swings better.
That said, the fold-and-store versatility is genuinely useful. If you alternate between hauling sheet goods, furniture, or ATVs on weekends and need organized tool access during the week, this tray adapts to both scenarios. Pair it with a quality bed liner to protect the bed floor when the tray is removed.
- Foldable design for compact storage when not in use
- 47.2-inch width provides near full-bed coverage
- Compatible with a wide range of trucks: F150, RAM, Tundra, Silverado, Sierra
- Adjustable tie-down straps and built-in anchor points included
- Easy to install and remove without tools
- ABS plastic is less impact-resistant than HDPE or metal in cold weather
- No formal weight capacity rating specified
5. LECARDIO Heavy Duty Slide-Out Truck Bed Cargo Tray
A solid budget alternative to the Rough Country with similar specs and a 3-year warranty at a lower price.
Check Price On AmazonThe LECARDIO is, frankly, very similar to the Rough Country in nearly every measurable way. Same HDPE material, same UV protection, same general dimensions, and the same 3-year warranty. The main difference is price — the LECARDIO typically costs less.
- Dimensions: 24" W × 62.2" L × 4" H — nearly identical to the Rough Country
- Material: high-density polyethylene with UV protection
- Tie-downs: integrated straps and anchor points for cargo security
- Compatibility: fits 5'5" beds and longer
- Warranty: 3-year manufacturer coverage
If you're choosing between this and the Rough Country, it comes down to brand trust versus savings. Rough Country has decades of aftermarket reputation. LECARDIO is newer but offers comparable specs for less money.
Like the Rough Country, this is a half-width tray. You'll cover one side of the bed, leaving the other open. For full-width solutions, step up to the ELEVATE OUTDOOR or KOKSHELY.
- HDPE construction with UV protection at a budget-friendly price
- Low 4-inch profile fits under most bed covers
- Integrated tie-down straps and anchor points
- 62.2-inch length handles ladders and long cargo
- 3-year manufacturer warranty included
- 23.6-inch width covers only one side of the bed
- Virtually identical to the Rough Country — limited differentiation
6. Maxzina Slide-Out Truck Bed Cargo Tray (Full-Size Trucks)
A clever dual-tray approach that gives independent access to both sides of the bed, but the 30-day warranty is a concern.
Check Price On AmazonThe Maxzina full-size tray takes a different approach: instead of one large platform, you get four pieces that pair into two independent trays — one for each side of the bed. This means you can slide out the left tray without moving the right, which is useful if you organize tools on one side and materials on the other.
- Dimensions per tray: 62.36" L × 23.92" W × 3.47" H
- Combined width: 47.83" when both trays are installed
- Installation: no drilling — attaches to existing bed hooks with adjustable straps
- Compatibility: Ford F150, Chevy Silverado, GMC Sierra, Dodge Ram, Toyota Tundra (5.2'+ beds)
The no-drill installation is a real plus — you can install or remove both trays in under 15 minutes. However, the 30-day warranty is a red flag. Competitors like Rough Country and LECARDIO offer 3-year coverage. If the HDPE cracks or a strap fails after day 31, you're on your own.
The four-piece design also means initial assembly takes more attention to get the pairs aligned correctly. Not difficult, but not as drop-in-and-go as single-piece trays.
- Dual-tray system: two independent trays, one per side of the bed
- No drilling required — straps to existing bed hooks
- HDPE material with UV protection
- Compatible with F150, Silverado, Sierra, RAM, and Tundra
- Easy to remove when full bed access is needed
- Only 30-day replacement warranty — far below the 3-year coverage from competitors
- Four-piece assembly requires pairing pieces correctly
7. Maxzina Slide-Out Truck Bed Cargo Tray (Ford Maverick)
The only slide-out tray sized specifically for the Ford Maverick. If you own one, this is essentially your only option.
Check Price On AmazonThe Maxzina Maverick tray exists because standard truck bed trays simply don't fit the Maverick's compact 4.5-foot bed. At 52.91" L × 20.47" W × 3.50" H per tray, these are scaled down specifically for the Maverick's dimensions.
- Fitment: 2022, 2023, 2024, 2025, and 2026 Ford Maverick (4.4'+ beds)
- Design: four pieces pair into two independent side trays (40.94" combined width)
- Installation: no drilling — strap-to-hook attachment with adjustable length
- Material: HDPE with UV protection, same as the full-size Maxzina version
If you own a Maverick and want slide-out bed organization, this is realistically your only aftermarket option right now. The compact truck segment is still underserved for bed accessories, so having a purpose-built tray is valuable even if the brand is newer.
The same 30-day warranty concern from the full-size Maxzina applies here. And since it only fits the Maverick, you can't transfer it to a different truck if you upgrade later. But for current Maverick owners, it transforms a small bed into a much more usable space.
- Purpose-built for 2022-2026 Ford Maverick — rare compact truck fitment
- Dual-tray independent side access
- No drilling required — strap-based installation
- HDPE material with UV protection
- Easily removable when not needed
- Only fits Ford Maverick — no cross-compatibility with other trucks
- 30-day warranty is the minimum in this category
Buying Guide: How to Choose the Best Truck Bed Slide Out Trays
What Material Should Your Slide-Out Tray Be Made From?
The three main materials are carbon steel/aluminum, HDPE (high-density polyethylene), and ABS plastic. Metal trays handle the heaviest loads — the ELEVATE OUTDOOR's steel-and-aluminum build supports 980 lbs. HDPE trays like the Rough Country and KOKSHELY balance durability with lighter weight. ABS is the lightest but can crack in extreme cold.
- Metal (steel/aluminum): highest weight capacity, most durable, heaviest, most expensive
- HDPE: excellent UV and weather resistance, moderate weight, good impact resistance across temperature ranges
- ABS plastic: lightweight and affordable, but brittle below freezing — best for temperate climates
If you haul heavy equipment daily, metal is worth the premium. For general-purpose use — tools, camping gear, groceries — HDPE hits the sweet spot of durability and value. Pair any tray with a protective bed liner underneath to prevent scratches on your bed floor.
How Much Weight Can Truck Bed Trays Actually Hold?
Most HDPE slide-out trays don't publish formal weight ratings, which makes the ELEVATE OUTDOOR's 980 lb. rating a standout. If you're loading toolboxes, generators, or stacked materials, a rated capacity matters. For lighter loads — coolers, bags, hand tools — any tray in this roundup will perform fine.
- 980 lbs (ELEVATE OUTDOOR): handles professional-grade equipment, stacked toolboxes, compressors
- Unrated HDPE trays: typically safe for 100-300 lbs of evenly distributed weight based on material thickness
- Key rule: distribute weight evenly across the tray surface — concentrated loads on one corner stress the rails
If your load regularly exceeds 200 lbs, choose a tray with published capacity specs. For lighter everyday use, material quality and slide mechanism matter more than raw weight rating.
Will a Slide-Out Tray Fit Under Your Tonneau Cover?
Tray height determines bed cover compatibility. Most trays in this roundup sit at 3.5 to 4 inches tall, which fits under virtually any tonneau cover — hard folding, soft rolling, or retractable. The exception is the KOKSHELY at 5 inches, which may conflict with low-profile covers.
- 3.47" - 4" (most trays): fits under all standard tonneau covers and most bed caps
- 4.25" (ELEVATE OUTDOOR): fits under most covers with slight clearance reduction
- 5" (KOKSHELY): may not fit under low-profile or flush-mount covers — measure before buying
Before purchasing, measure the gap between your bed floor and the lowest point of your cover with the tailgate closed. Subtract 0.5 inches for clearance. If you're shopping for a cover too, our truck bed cover buying guide breaks down which styles offer the most interior clearance.
Do You Need Full-Width or Half-Width Coverage?
Full-width trays (46-52 inches) cover most of your bed floor and work best as a single organized platform. Half-width trays (23-24 inches) cover one side, leaving the other open for oversized cargo. Neither approach is universally better — it depends on how you use your truck.
- Full-width (ELEVATE, KOKSHELY, Sts.Ev01): best for contractors who want everything on one slideable platform
- Half-width (Rough Country, LECARDIO): best if you mix organized storage with loose cargo like lumber or furniture
- Dual independent trays (Maxzina): best of both worlds — slide each side independently, or remove one for large loads
Think about your typical week. If 80% of your loads are tools and organized gear, go full-width. If you regularly haul sheet goods, bikes, or furniture alongside your tools, half-width or dual-tray gives you that flexibility.
How Easy Is Installation — And Can You Remove It?
Every tray in this roundup installs without drilling, but installation complexity varies. Single-piece trays like the Rough Country and LECARDIO are the simplest — set in the bed, strap down, done in 10 minutes. Multi-piece systems like the Maxzina require assembling four pieces into two trays before securing.
- Simplest: single-piece HDPE trays (Rough Country, LECARDIO) — drop in and strap
- Moderate: full-width trays (KOKSHELY, ELEVATE) — heavier, may need two people to position
- Most assembly: four-piece dual trays (Maxzina) — pair pieces, then strap each tray independently
Removability matters if you alternate between organized loads and open-bed hauling. The Sts.Ev01's foldable design and the Maxzina's strap-on system are the quickest to remove. Heavier metal trays like the ELEVATE OUTDOOR are more of a semi-permanent install.
What Warranty Coverage Should You Expect?
Warranty coverage in this category ranges from 30 days to 3 years — a massive gap. Longer warranties signal manufacturer confidence in durability. For a product that lives outdoors in sun, rain, and temperature extremes, warranty coverage directly correlates with long-term value.
- 3-year warranty: Rough Country and LECARDIO — best coverage in this roundup
- 30-day replacement: Maxzina (both models) — covers shipping damage and initial defects only
- Unspecified: ELEVATE OUTDOOR, KOKSHELY, Sts.Ev01 — check manufacturer websites for current terms
If you're spending $100+ on a tray that sits in the elements year-round, a 3-year warranty provides meaningful protection. The 30-day window on the Maxzina trays essentially covers dead-on-arrival defects only — not long-term durability.
Final Verdict
For most truck owners, the decision comes down to how much weight you haul and whether you need full-width or half-width coverage. The ELEVATE OUTDOOR dominates on raw capability with its 980 lb. capacity and metal construction — it's the only tray here built for truly heavy professional loads. The KOKSHELY earns its spot for the smoothest daily operation thanks to 12 bearing wheels and a complete accessory kit. And for budget-conscious buyers who want brand-backed reliability, the Rough Country delivers solid HDPE construction with a 3-year warranty.
Best Overall
ELEVATE OUTDOOR — Best for contractors and heavy haulers who need 980 lbs of rated capacity and premium metal construction that won't flex under stacked toolboxes.
Best Value
Rough Country — Best for long bed owners who want trusted brand quality, HDPE durability, and a 3-year warranty at a mid-range price point.
Best Premium
KOKSHELY Dual-Wall — Best for daily drivers who prioritize effortless operation with 12 bearing wheels, anti-slip drainage surface, and a complete tie-down accessory bundle.
ELEVATE OUTDOOR Slide-Out Truck Bed Tray
Best for Heavy-Duty Jobsite UseFrequently Asked Questions
Are truck bed slide out trays worth it?
Can you use a slide-out tray with a tonneau cover?
How much weight can a truck bed slide-out tray hold?
Do slide-out truck bed trays require drilling for installation?
What is the difference between a truck bed slide-out tray and a truck bed drawer?
Will a slide-out tray work with a bed liner?
Can you use two half-width trays to cover the full bed?
How do you secure cargo on a slide-out tray?
Affiliate Disclosure: This article contains affiliate links. If you purchase through these links, we may earn a commission at no extra cost to you.